JWK - Jackall's IT Wiki

Sécurité, Système, Réseau

Outils pour utilisateurs

Outils du site


en:watchguard_xtm505

Watchguard XTM 505

Ports

  • 8 ethernet Gb
  • 1 management port
  • 1 Console (RJ45 vers RS232)
  • 1 port USB

Access

Default Access :

terminal VT100

      115200 bauds
      Data 8 bits
      stop bit 1
      parity No
      flow control no
* SSH2
      port 4118

Licence

Once logged on Watchguard website, use the firewall serial number to add a new equipement. Licence will be download on the appliance when connected to internet.

Login

Two default account :

      admin/readwrite
      status/readonly

Upgrade

Web UI

Download last version of the firewall OS (sysa-dl version) from watchguard site.

In System > Upgrade OS choose the file you downloaded and upgrade.

Admin

Install Watchguard System Manager

Clic on “connect Device” then enter IP address and status passphrase.

Firebox system manager

There we can : See general state of the appliance See log in “traffic Monitor” See bandwidth log See current IPSec tunnel Blocked IP list Subscription (update IPS antivirus etc…)

Policy manager

Here you can manage filtering policy, IP address, etc…

Factory default

CLI

At startup

ata0: SATA max UDMA/133: lba 48 mode
         Model: WDC WD1600AAJS-00YZCA0 Firm: 01.03B01 Ser#: WD-WMAYV3893886
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 152627.8 MB = 149.0 GB (312581808 x 512)

USB:   (port 1) No USB devices found.



        Autoboot to default partition in 5 seconds.
        Enter 'maint' to boot to maint partition.

Entry: maint

Booting to maint mode.

search?q=Security%20Watchguard%20Hardware%20Appliance%20Firewall%20EN&btnI=lucky

en/watchguard_xtm505.txt · Dernière modification: 2018/02/18 16:01 (modification externe)